Grand Prix V6-3.8L VIN 2 (2004)
8. Lower the ignition switch away from the I/P trim pad.
9. Insert the key into the ignition lock cylinder. Turn the key to the ON/RUN position.
10. Depress and hold the detent on the bottom of the ignition switch in order to release the ignition lock cylinder. Remove the ignition lock cylinder
with the key.
11. Remove the key from the lock cylinder.
12. Disengage the theft deterrent reader/exciter module retainers (1,2).
Remove the theft deterrent reader/exciter module (3) from the lock cylinder housing.
13. Remove the lock cylinder.
14. If the cylinder does not rotate, follow the procedure in the ignition switch replacement. Refer to Ignition Switch Replacement. See: Service and
Repair
Installation Procedure
