Grand Prix V6-3.8L VIN 2 (2004)
11. Remove the right/passenger door trim panel.
12. Remove enough of the water deflector to access the SIS.
13. Remove the SIS CPA from the right SIS connector (3).
14. Remove the SIS connector (3) from the SIS (1).
ENABLING PROCEDURE
1. Remove the key from the ignition switch.
2. When enabling the SIS proceed to step 3. if the root rail module needs enabling then go to step 7.
3. Install the right SIS connector (3) to the SIS (1).
4. Install the SIS CPA to the SIS connector (3).
5. Replace and secure the water deflector back over the SIS.
6. Install the right/passenger door trim panel.
