Grand Prix V6-3.8L VIN 2 (2004)
Impact Sensor: Service and Repair
Inflatable Restraint Front End Sensor Replacement
INFLATABLE RESTRAINT FRONT END SENSOR REPLACEMENT
REMOVAL PROCEDURE
CAUTION:
-
DO NOT STRIKE ORBIT THE INFLATABLE RESTRAINT FRONT END SENSOR. BEFORE APPLYING POWER TO THE
FRONT END SENSOR MAKE SURE THAT IT IS SECURELY FASTENED. FAILURE TO OBSERVE THE CORRECT
INSTALLATION PROCEDURE COULD CAUSE SIR DEPLOYMENT, PERSONAL INJURY, OR UNNECESSARY SIR SYSTEM
REPAIRS.
-
REFER TO SIR CAUTION IN SERVICE PRECAUTIONS.
1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 1.
2. Remove the radiator upper air baffle and deflector.
3. Remove the sensor bolts (1).
4. Remove the sensor (2) from the upper radiator core support (3).
5. Remove the orange connector position assurance (CPA) (2) from the yellow sensor harness connector (3).
6. Disconnect the harness connector from the sensor (1).
7. Remove the sensor from the vehicle.
INSTALLATION PROCEDURE