Grand Prix V6-3.8L VIN 2 (2004)
Power Steering Pump: Service and Repair
Power Steering Pulley Replacement
Power Steering Pulley Replacement
Tools Required
^
J25033-C Pulley Installer
^
J25034-C Pulley Remover
Removal Procedure
1. Remove the power steering pump from the engine for clearance.
2. Using J25034-C remove the power steering pump pulley from the power steering pump.
Installation Procedure
Important:
^
Never use a hammer to install the power steering pulley.
^
The face of the power steering pulley hub must be flush with the end of the power steering pump driveshaft.
1. Using J25033-C install the power steering pump pulley to the power steering pump.
2. Install the power steering pump to the engine.
3. Fill the power steering system.
4. Bleed the power steering system.
5. Inspect the power steering system for leaks.
