Grand Prix V6-3.8L VIN 2 (2004)
1. Install the spindle rod (1) to the vehicle.
2. Install the spindle rod (1) to the knuckle (3).
3. Install the spindle rod to knuckle bolt and nut. Do not tighten at this time.
4. Install the spindle rod (9-10) to the rear suspension support.
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the bolt (1-2) and nut to the rear suspension support.
Tighten the bolt to 150 Nm (110 ft. lbs.).
6. Install the rear suspension support.
Tighten the bolt to 150 Nm (110 ft. lbs.).
7. Install the tire and wheel assembly.
8. Lower the vehicle.
9. Adjust the wheel toe angle.
