Grand Prix V6-3.8L VIN 2 (2004)
1. Remove the strut-to-body mount nuts.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the tire and wheel assembly.
4. Remove the stabilizer shaft link from the strut.
5. Scribe the strut to the knuckle.
Notice: The knuckle must be retained after the strut-to-knuckle bolts have been removed. Failure to observe this may cause ball joint and/or wheel
drive shaft damage.
6. Remove the strut to knuckle bolts.
7. Remove the strut from the vehicle.
Installation Procedure