Grand Prix V6-3.8L VIN 2 (2004)
Pressure Regulating Solenoid: Service and Repair
Pressure Control Solenoid (PCS) Replacement
Removal Procedure
1. Remove the case side cover.
2. Disconnect the pressure control solenoid electrical connector.
3. Remove the pressure control solenoid retaining clip (314E).
4. Remove the pressure control solenoid (322).
Installation Procedure
1. Install the pressure control solenoid (322).
2. Install the pressure control solenoid retaining clip (314E).
3. Connect the pressure control solenoid electrical connector.
4. Install the case side cover.
