Grand Prix V6-3.8L VIN 2 (2004)
Tighten the bolts to 12 Nm (106 inch lbs.).
6. Remove the drain pan from under the forward servo cover.
7. Adjust the jackstand to raise the rear of the frame.
8. Install the frame bolts.
9. Remove the support from the rear of the frame.
10. Install the power steering lines to the right side of the frame.
11. Install the engine mount lower nuts.
12. Install the transaxle mount lower nuts.
13. Install the power steering gear.
14. Lower the vehicle.
15. Remove the engine support fixture.
16. Check and fill the transaxle as necessary.
