Grand Prix V6-3.8L VIN 2 (2004)
2. Install the O-ring (8) to the case extension housing (6).
3. Install the case extension housing (6) with the axle seal and the O-ring (8).
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the case extension housing bolts (5).
Tighten the bolts to 36 Nm (27 ft. lbs.).
5. Install the vehicle speed sensor.
6. Install the transaxle brace.
7. Install the right drive axle to the transaxle.
8. Lower the vehicle.
9. Connect the negative battery cable.
Notice: Refer to Do Not Overfill the Transmission Notice in Service Precautions.
10. Check and fill the transaxle as necessary.
11. Inspect for fluid leaks.
