Grand Prix V6-3.8L VIN 2 (2004)
14. Align the following items while latching:
-
The halfshaft inboard seal
-
The tripot housing (2)
-
The large seal retaining clamp (3)
Crimp the seal retaining clamp with J35910 to 176 Nm (130 ft. lbs.). Add the breaker bar (5) and the torque wrench (4) to J35910 if necessary.
15. Check the gap dimension (a) on the clamp ear. If gap dimension is larger than shown, continue tightening until gap dimension of 2.60 mm (0.102
inch) is reached.