Grand Prix V6-3.8L VIN 2 (2004)
Power Window Switch: Service and Repair
Mirror, Window, and Door Lock Switch Replacement
Mirror, Window, and Door Lock Switch Replacement
Removal Procedure
Important: When removing a power window switch, the ignition switch must be in the OFF position. This will eliminate the possibility of
shorting out the power window switch when using a metal tool to remove the power window switch from the wiring harness.
1. Remove the door trim panel. Refer to Trim Panel Replacement - Side Front Door (See: Body and Frame/Doors, Hood and Trunk/Doors/Front
Door/Front Door Panel/Service and Repair) .
2. Disengage the electrical connectors from the following switches:
*
Rear compartment lid switch (1)
*
The power window switch (2)
*
The door lock switch (3)
*
The power mirror switch(4)
3. Remove the electrical harness from the trim panel.
4. Using a small, flat-bladed tool, remove the switches from the mounting bezel.
Installation Procedure
