Grand Prix V6-3.8L VIN K (1998)
Remove or Disconnect
1. Drain cooling system.
2. Fuel injector sight shield. Refer to Engine Cover Replacement See: Engine, Cooling and Exhaust/Engine/Service and Repair.
3. Heater outlet hose from pipe adapter.
4. Pipe adapter mounting bolt.
5. Pipe adapter.
Install or Connect
1. Pipe adapter.
^
Lubricate O-ring.
2. Pipe adapter mounting bolt.
Tighten
^
Bolt to 6 N.m (53 lb. in.).
3. Heater outlet hose from pipe adapter.
4. Fuel injector sight shield. Refer to Engine Cover Replacement See: Engine, Cooling and Exhaust/Engine/Service and Repair.
5. Drain cooling system.
