Grand Prix V6-3.8L VIN K (1998)
Automatic Transmission Dipstick - Dipstick Tube: Service and Repair
REMOVAL PROCEDURE
1. Remove the indicator.
2. Raise and support the vehicle.
3. Disconnect the three-way catalytic converter pipe.
4. Remove the fluid filler tube bracket bolt from the fluid filler tube bracket.
5. Remove the fluid filler tube.
INSTALLATION PROCEDURE
1. Install the fluid filler tube seal in the transaxle.
IMPORTANT: Do NOT place the fluid filler tube seal on the fluid filler tube when installing the tube or damage to the seal will result.
2. Position the fluid filler tube.
3. Install the fluid filler tube bracket bolt through the fluid filler tube bracket.
^
Tighten the fluid filler tube bracket bolt to 13 Nm (115 inch lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
4. Connect the three-way catalytic converter pipe.
5. Lower the vehicle.
6. Install the indicator.
7. Adjust the fluid level.
8. Inspect for proper fluid level.
9. Inspect for fluid leaks.
