Grand Prix V6-3100 3.1L MFI VIN M (1994)
1.
With the door open, remove bezel covering the lock rods.
2.
Remove outside handle lock rod from the door handle linkage. With the rod at ease and the linkage on the door handle in the full up position,
adjust the barrel nut until the attaching knob of the nut aligns to the attaching hole in the door handle linkage. Push forward to reinstall.
3.
Check operation of both inside and outside handle.
4.
Re-install bezel.
WARRANTY INFORMATION:
For vehicles repaired under warranty, use:
Labor Operation:
T-3458
Labor Time:
0.7
Hr. (Sedan)
0.2
Hr. (Coupe)
