Grand Prix V6-3100 3.1L MFI VIN M (1994)
2. Wiring harness from case electrical connector and leads from 3rd clutch pressure switch (governor pressure switch if applicable).
3. Torque converter clutch bolt to auxiliary valve body.
4. 3rd clutch pressure switch.
5. Second clutch switch, if applicable.
INSTALL OR CONNECT
1. Second clutch switch, if applicable.
2. 3rd clutch pressure switch.
3. Torque converter clutch bolt to auxiliary valve body. Install new O-ring.
4. Wire harness to case and switches.
5. Valve body cover with a new gasket.
ADJUST
^
Fluid level.
Valve Body Cover
VALVE BODY COVER
Side Cover And Control Valve View
Valve Body Cover
TOOLS REQUIRED
^
J 28467-A Engine Support Fixture
^
J 36462 Engine Support Adapter Leg
REMOVE OR DISCONNECT
1. Air cleaner assembly.
2. Negative battery cable.
3. Left torque strut at engine.
4. Left torque strut bracket.
