Grand Prix V6-3100 3.1L MFI VIN M (1994)
^
Nuts to 43 Nm (32 lb. ft.).
CAUTION: When installing the intermediate shaft make sure the shaft is seated prior to pinch bolt installation. If the pinch bolt is inserted
into the coupling before shaft Installation, the two mating shafts may disengage.
7. Pinch bolt at intermediate steering shaft.
8. Splash shield.
9. Tire and wheel.
10. Lower vehicle.
11. Left-hand torque strut bracket.
12. Transaxle bracket to bolt/screw.
TIGHTEN
^
Bolt/screw to 48 Nm (35 lb. ft.).
13. Remove J 28467-A and J 36462.
14. Negative battery cable.
15. Air cleaner.
Transaxle Mount
TRANSAXLE MOUNT
Transaxle Bracket
REMOVE OR DISCONNECT
1. Transaxle bracket. Refer to "Transaxle Support Assembly (Bracket)".
2. Nuts and bolts/screws attaching mount support to frame.
3. Mount support.
4. Nuts attaching mount to support.
INSTALL OR CONNECT
1. Mount and attaching nuts to support.
TIGHTEN
^
Nuts to 47 Nm (35 lb. ft.).
2. Support and attaching bolts/screws and nuts.
TIGHTEN
^
Bolts/screws to 58 Nm (43 lb. ft.).
^
Nuts to 44 Nm (32 lb. ft.).
