Grand Prix V6-3100 3.1L MFI VIN M (1994)
Transaxle Range Switch: Description and Operation
Park/Neutral (P/N) Switch 3T40
Park/Neutral Switch (Auto. Trans)
PURPOSE:
The PARK/NEUTRAL (P/N) switch indicates to the computer when the transmission is in PARK, NEUTRAL or DRIVE. This information is
used by the PCM for Idle Air Control (IAC), Torque Converter Clutch (TCC)and Exhaust Gas Recirculation (EGR) operation.
OPERATION:
The P/N switch contacts are a part of the neutral switch and are closed to ground in park or neutral and open in drive ranges and reverse. The PCM
supplies ignition voltage through a current limiting resistor to the switch and senses a closed circuit when voltage drops to less than 1 volt.
NOTE: DO NOT drive the vehicle with the PARK/NEUTRAL switch disconnected, since idle quality may be affected.
LOCATION:
Top of transaxle.
