Grand Prix V6-3100 3.1L MFI VIN M (1994)
1. Case side cover pan. Refer to "Case Side Cover and Gaskets".
2. Clips retaining solenoid.
3. Electrical connectors and solenoid.
INSTALL OR CONNECT
1. Electrical connectors and solenoid.
2. Solenoid retaining clips.
3. Case side cover pan.
Adjust
^
Fluid level.
Case Side Cover and Gaskets
CASE SIDE COVER PAN AND GASKETS
TOOLS REQUIRED:
^
J 28467-A Engine Support Fixture
^
J 28467-90 Engine Support Fixture Adapter
^
J 36462 Engine Support Adapter Leg
REMOVE OR DISCONNECT
1. Air cleaner.
2. Crossover pipe.
3. Shift cable Clip at lever and mount bracket.
4. Install J 28467-A, J 28467-90 and J 36462.
5. Raise vehicle and suitably support.
6. Left front wheel.
7. Left inner fender splash shield.
8. Transaxle mount. Refer to "Transaxle Mount".
9. Loosen engine mount nuts at frame.
CAUTION: Failure to disconnect the intermediate shaft from the rack and pinion stub shaft can result in damage to the steering gear and/or
intermediate shaft. This damage may cause loss of steering control which could result in personal injury.
