Grand Prix V6-3100 3.1L VIN M SFI (1996)
Removing And Installing Cam-lock Booster
REMOVE OR DISCONNECT
1. Nuts (33) and master cylinder (31) from booster (32).
NOTICE: When disconnecting the pushrod from brake pedal, the brake pedal must be held stationary or damage to the brake switch may result.
Booster Assembly
2. Unlock booster (32) from front of dash.
3. Attach J 22805-01 to booster (32) with nuts (33).
TIGHTEN
^
Nuts (33) to 27 Nm (20 lb. ft.).
4. Use a screwdriver (35) to pry locking tab (36) on booster (32) out of locking notch (37) on mounting flange. At the same time turn the booster
counterclockwise with a wrench (38) on J 22805-01.
NOTICE: Do not attempt to remove booster (32) until pushrod is disconnected from the brake pedal.
