Grand Prix V6-3100 3.1L VIN M SFI (1996)
Oil Pan: Service and Repair
OIL PAN AND DEFLECTOR
Tools Required:
^
J 28467-A Engine Support Fixture
^
J 36462 Engine Support Adapter Leg
^
J 39505 Torque Wrench Adapter
Remove or Disconnect
1. Remove hood panel.
2. Engine mount strut and air conditioning compressor and engine mount strut bracket.
3. Elecrric engine cooling fan.
4. Install J 28467-A and J 36462.
5. Raise and suitably support vehicle.
6. Front exhaust manifold pipe.
7. Intermediate steering shaft bolt/screw.
8. Drain engine oil.
9. Oil level sensor.
10. Engine splash shield.
11. Suitably support drivetrain and front suspension frame with floor stands.
12. Transaxle mount frame side nuts from drivetrain and suspension frame.
13. Engine mount frame side nuts from drivetrain and front suspension frame.
14. Rear drivetrain and front suspension frame bolts/screws.
15. Lower drivetrain and front suspension frame bolts/screws.
16. Engine mount.
17. Flywheel. inspection cover.
18. Starter motor.
19. Transaxle mount from oil pan.
20. Side bolts/screws.
21. Retaining bolts/screws.
22. Oil pan and gasket.
