Grand Prix V6-3100 3.1L VIN M SFI (1996)
Crankshaft Sprocket Installation
TOOLS REQUIRED:
J 23444-A Crankshaft Sprocket Remover J 38612 Crankshaft Sprocket Installer.
REMOVE OR DISCONNECT
1. Engine front cover assembly.
2. Rotate crankshaft assembly until timing marks on crankshaft sprocket (24) and camshaft sprocket (92) are aligned to marks on engine block (52)
or timing chain dampener (51). This is the number 1 piston at top dead center.
3. Camshaft sprocket bolt/screw (91).
4. Camshaft sprocket (92) and timing chain assembly (25).
5. Crankshaft sprocket (24) using J 23444-A.
6. Timing chain dampener bolts/screws (50) and dampener (51).
INSTALL OR CONNECT
