pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

All Other Service Bulletins for Band: > < A/T - Slipping During 1-2 or 3-4, No 1-2 or 3-4 Upshift|Page 2717
Page 1
background image

Band: Customer Interest
A/T - No Fourth Gear/Burned 2-4 Band Assembly

Number

83-T-26

Section 7  Date 04/83

Subject:

NO FOURTH GEAR AND/OR BURNED 2-4 BAND ASSEMBLY - THM 700-R4

If a condition of no fourth gear and/or a burned 2-4 band assembly is encountered on any THM 700-R4 transmission, the cause may be a blocked 2-4
servo exhaust hole (see illustration)..
The use of R.T.V. silicone sealant and/or some aftermarket oil pan gaskets may block this 2-4 servo exhaust hole causing the above conditions.

When installing the oil pan on any THM 700-R4 transmission be certain to use original equipment oil pan gaskets so the 2-4 servo exhaust hole is not
blocked. Also, do not use R.T.V. silicone sealant on any THM 700-R4 oil pan.

All Other Service Bulletins for Band: > < A/T - Slipping During 1-2 or 3-4, No 1-2 or 3-4 Upshift|Page 2717