Grand Prix V8-5.3L (2007)
1. Position the rear bumper energy absorber to the rear fascia.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the screws to the rear bumper energy absorber.
Tighten the screws to 2 N.m (18 lb in).
3. Position the rear bumper fascia (4) to the vehicle.
4. Install the push-in retainers (5) to the rear bumper fascia.
5. Install the rear bumper fascia bolts (6) to the fascia.
Tighten the bolts to 10 N.m (89 lb in).
6. Lower the vehicle.
7. Install the push-in retainers (3) to the top edge of the fascia.
8. Install the fascia bolts (1) and nuts (2) to the rear bumper fascia.