pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Energy Absorber Pad Replacement - Inner Rear|Page 15667 > < Energy Absorber Pad Replacement - Inner Rear|Page 15665
Page 1
background image

Rear Door Panel: Service and Repair
Front Side Door Armrest Front Finish Cover and Rear Side Door Armrest Finish Cover Replacement

Front Side Door Armrest Front Finish Cover and Rear Side Door Armrest Finish Cover Replacement

Removal Procedure

Notice:  The ball stud must not rotate during disassembly or reassembly. Hand tools must be used to keep the ball stud from rotating. If air tools
are used and the stud is allowed to rotate, damage to the ball stud and/or stud mounting hole may occur.

1. Insert a flat-bladed tool at the lower front edge of the cover.
2. Pry out to remove the cover from the handle.

Installation Procedure

1. Position the cover in the pull handle.
2. Press firmly to secure the cover.

Energy Absorber Pad Replacement - Inner Rear|Page 15667 > < Energy Absorber Pad Replacement - Inner Rear|Page 15665