pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Energy Absorber Pad Replacement - Inner Rear|Page 15677 > < Energy Absorber Pad Replacement - Inner Rear|Page 15675
Page 6
background image

2. For the lower absorber, slide the rear tabs (1) into the retainers.
3. Press the side retainer out and insert the remaining tab.

4. Press the retaining clips (1) down onto the absorber retaining post (2).
5. Install the rear door trim panel.

Rear Side Door Trim Panel Replacement

Rear Side Door Trim Panel Replacement

Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover

Removal Procedure

1. Insert a flat-bladed tool at the front edge of the door handle bezel. Pull the bezel away from the door to disengage the retaining clips.

2. Use a flat-bladed tool to remove the cover plate from the armrest pull handle.

Energy Absorber Pad Replacement - Inner Rear|Page 15677 > < Energy Absorber Pad Replacement - Inner Rear|Page 15675