Grand Prix V8-5.3L (2007)
1. Install the armrest and the hinge.
2. Install the accessory power receptacles.
3. Install the traction control switch.
4. Install the HUD switch, if equipped.
5. Install the wiring harness.
6. Position the floor console to the vehicle.
7. Connect the electrical connector at the front of the floor console. Slide the floor console toward the front of the car.
8. Install the shift handle. Install the shift handle screw.
9. Shift the transaxle to P.
Notice: Refer to Fastener Notice.
10. Install the floor console bolts. Adjust the front seats as required.
Tighten the bolts to 10 N.m (89 lb in).
11. Release the park brake.
Front Floor Console Trim Plate Replacement
Front Floor Console Trim Plate Replacement
Removal Procedure
1. Remove the floor console.
2. Remove the ashtray insert.
3. Remove the cupholder liner.
4. Remove the wiring harness.
5. Remove the HUD switch, if equipped.