Grand Prix V8-5.3L (2007)
1. Pull the rear of the cover under the seat back.
2. Engage the hook and loop retainers.
3. Insert the rear J-hook under the seat back.
4. Pull the trim down over the seat frame.
5. Engage the hook and loop retainer on the door side of the cushion cover.
6. Install the J-hooks by the seat belt buckle.
7. Install the J-hooks to the seat frame.
8. Install the seat trim panel.
9. Install the front seat.
Caution: To avoid personal injuries, re-zero the passenger presence system whenever you remove or replace the seat cushion or trim.
Failure to do so may cause the system to malfunction.
10. Re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is
removed. Refer to Passenger Presence System Programming and Setup.
