Grand Prix V8-5.3L (2007)
1. Remove the front seat.
2. Remove the seat trim panel.
3. Remove the J-hooks to the seat frame.
4. Remove the J-hooks by the seat belt buckle.
5. Remove the hook and loop retainer on the door side of the cushion cover.
6. Pull the trim up over the seat frame.
7. Disengage the hook and loop retainers to the seat pad.
8. Remove the cover from under the seat back.
9. Remove the front seat cushion cover from the seat frame.
Caution: Replace the passenger presence system as a complete assembly to prevent possible injury to the occupant. All the components in
the service kit are assembled and calibrated as a unit. Using only some of the components in the service kit will cause the passenger
presence system to operate improperly.
10. If replacing the front passenger seat cushion pad, you must also replace the inflatable restraint passenger presence system. Refer to Inflatable
Restraint Passenger Presence System Replacement - Front.
Installation Procedure
