Grand Prix V8-5.3L (2007)
6. Install the water pump manifold (315) and NEW gaskets (306).
1. Tighten the M10 bolts to 60 N.m (44 lb ft).
2. Tighten the M8 bolts to 30 N.m (22 lb ft).
7. Install the water pump manifold bolts (301).
8. Install the camshaft position sensor.
9. Install the cylinder head to coolant pump manifold bolts.
10. Connect the engine coolant air bleed pipe hose and clamp.
11. Install the water pump (300) and a NEW gasket (314).
12. Install the water pump bolts (318) until sung.
13. Connect the power steering pipes and hoses to the pump and reservoir.
14. Install the power steering pump pulley.
15. Install the bolt that retains the power steering pipe to the front of the engine.
16. Install the wiring harness to the clips on the front of the engine.
17. Install the drive belt.
Tighten the bolts to 10 N.m (89 lb in).
19. Connect the heater hoses to the coolant pump manifold.
20. Connect the radiator hoses to the coolant pump manifold.
21. Fill and bleed the power steering system.
22. Fill the cooling system.
