Grand Prix V8-5.3L (2007)
Notice: Refer to Fastener Notice in Service Precautions.
2. Start the HUD bolts by hand to avoid cross threading. Install the HUD bolts.
Tighten the bolts to 10 N.m (89 lb in).
3. Install the HUD screw.
Tighten the screw to 2 N.m (18 lb in).
4. If a new HUD was installed remove the protective plastic sheet from the glass.
5. Install the I/P upper trim panel.
6. Install the windshield pillar garnish moldings.
7. Install the instrument cluster.
8. Install the I/P cluster trim plate.
9. Install the I/P steering column opening filler.
10. Install the I/P accessory trim plate.
Head Up Display Switch Replacement
Head Up Display Switch Replacement
Removal Procedure