Grand Prix V8-5.3L (2007)
5. Remove the DRL ambient light sensor from the I/P upper trim panel by rotating the sensor counterclockwise.
6. Remove the DRL ambient light sensor from the DRL ambient light sensor connector.
INSTALLATION PROCEDURE
1. Install the DRL ambient light sensor to the DRL ambient light sensor connector.
2. Position the DRL ambient light sensor to the opening in the I/P upper trim panel. Rotate the DRL ambient light sensor clockwise.
3. Verify that the DRL ambient light sensor wiring harness will not be pinched when the I/P upper trim panel is installed. Press down on the I/P upper
trim panel in order to engage the retainers to the I/P trim pad.
4. Install the garnish moldings to the left and right windshield pillars.
