Grand Prix V8-5.3L (2007)
INSTALLATION PROCEDURE
1. Press the necessary bulbs into the sockets, if replacing the bulbs.
2. Install the bulb/socket to the tail lamp housing assembly. Rotate each socket clockwise to secure.
3. Position the tail lamp assembly (3) to the rear body panel.
4. Connect the electrical connector (2) to the tail lamp.
5. Apply light pressure to the lens of the tail lamp assembly to hold it in position during installation of the wingnuts.
6. Install the tail lamp assembly wingnuts (1) and hand tighten.
7. Position the corner of the rear compartment trim to its original position.
8. Install the rear compartment sill plate.
9. Install the rear compartment convenience net to the wingnuts, if equipped.
10. Close the rear compartment.
