Grand Prix V8-5.3L (2007)
Tail Light Bulb: Service and Repair
TAIL LAMP ASSEMBLY AND /OR BACKUP, SIDEMARKER, STOP, TURN SIGNAL BULB REPLACEMENT
REMOVAL PROCEDURE
1. Open the rear compartment.
2. Remove the rear compartment convenience net from the plastic wingnuts, if equipped.
3. Remove the rear compartment sill plate.
4. Pull back the corner of the rear compartment trim to access the plastic wingnuts.
5. Apply light pressure to the tail lamp lens to retain the lamp in position during removal of the wingnuts.
6. Remove the wingnuts (1) from the tail lamp.
7. Remove the tail lamp assembly (3) from the rear body panel.
8. Disconnect the electrical connector (2) from the tail lamp.
9. Remove the necessary bulb/socket by turning counterclockwise.
10. Pull the necessary bulbs from the sockets, if replacing the bulbs.
