pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

ABOUT US
Coolant Temperature Sensor/Switch (For Computer) > < Diagram Information and Instructions|Page 7714

Grand Prix V8-5.3L (2007)

Page 2
background image

1. Lubricate the O-ring seal with clean engine oil.
2. Install the O-ring seal (704) onto the CMP sensor, if necessary.
3. Install the CMP sensor (703).

Notice:  Refer to Fastener Notice in Service Precautions.

4. Remove the CMP sensor bolt (705).

Tighten the bolt to 12 N.m (106 lb in).

5. Connect the CMP sensor electrical connector.

Coolant Temperature Sensor/Switch (For Computer) > < Diagram Information and Instructions|Page 7714