Grand Prix V8-5.3L (2007)
9. Install the lamp to the left I/P insulator opening.
10. Align the left I/P insulator to the I/P trim pad.
11. Install the I/P insulator fasteners.
12. Connect the upper electrical connector to the BCM. Engage the cam lock.
13. Align the left I/P compartment access hole cover to the I/P trim pad. Press the I/P compartment access hole cover to the I/P trim pad.
14. Perform the new BCM setup. Refer to Control Module References. See: Testing and Inspection/Programming and Relearning