Grand Prix V8-5.3L (2007)
Important: Make certain the roof rail module is not twisted when installed.
4. Position the roof rail module over the sail panel bracket (4).
Important: The sunroof drainage hoses must be routed outboard of the roof rail module.
5. Install the inflatable restraint roof rail module screws (1).
Tighten the screws to 10 N.m (89 lb in).
6. Install the harness connector (2) to the inflator (3). Engage the CPA.
7. Install the headliner electrical harness retainer to the inflator bracket.
8. Install the headliner.
9. Enable the SIR system. Refer to SIR Disabling and Enabling.
10. Fully deploy the module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required
retention period. Refer to Inflator Module Handling and Scrapping.
