Grand Prix V8-5.3L (2007)
7. Remove the nut from the seat belt pretensioner bracket.
8. Remove the wiring harness from the seat belt pretensioner through the seat bottom frame.
9. Remove the pretensioner and bracket, from the seat.
Installation Procedure
1. Position the pretensioner to the seat bottom frame.
2. Position the wiring harness to the seat belt pretensioner through the seat bottom frame.
3. Connect the pretensioner electrical connector to the seat electrical harness.
4. If equipped, connect the seat belt reminder cable.
Notice: Refer to Fastener Notice.
Important: If the pretensioner to bracket nut was removed it requires the same torque as the bracket to seat adjuster nut.
5. Install the nut to the seat belt pretensioner bracket.
Tighten the nut to 40 N.m (30 lb ft).
