Grand Prix V8-5.3L (2007)
Wheel Speed Sensor: Service and Repair
Front Wheel Speed Sensor Replacement
Front Wheel Speed Sensor Replacement
Removal Procedure
Important: The front wheel speed sensors and rings are integral with the hub and bearing assemblies.
If a speed sensor or a ring needs replacement, replace the entire hub and bearing assembly. Do not service the harness pigtail individually
because the harness pigtail is part of the sensor.
Remove the hub and bearing assembly.
Installation Procedure
1. Install the hub and bearing assembly to the vehicle.
2. Turn the ignition switch to the ON position with the engine OFF.
3. Perform the diagnostic system check.
