Grand Prix V8-5.3L (2007)
Ignition Switch Lock Cylinder: Removal and Replacement
IGNITION SWITCH LOCK CYLINDER REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the battery ground cable.
2. Use a plastic trim tool to remove the ignition switch bezel.
3. Remove the instrument panel (I/P) accessory trim plate.
4. Remove the left I/P insulator.
5. Remove the opening filler panel from the I/P steering column.
6. Remove the I/P driver knee bolster.
7. Remove the ignition switch bolts.
8. Lower the ignition switch away from the I/P trim pad.
9. Insert the key into the ignition lock cylinder. Turn the key to the ON/RUN position.