Grand Prix V8-5.3L (2007)
Stabilizer Bushing: Service and Repair
Rear Suspension
Stabilizer Shaft Insulator Replacement
Removal Procedure
1. Raise and support the vehicle. refer to Vehicle Lifting.
2. Remove the stabilizer shaft bolt and clamp.
3. Remove the stabilizer shaft insulator (2) from the stabilizer shaft.
Installation Procedure
1. Install the stabilizer shaft insulator (2) to the stabilizer shaft.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the stabilizer shaft insulator bracket.
Tighten the bolt to 48 N.m (35 lb ft).
3. Lower the vehicle.