Grand Prix V8-5.3L (2007)
Windshield Washer Reservoir: Service and Repair
WASHER SOLVENT CONTAINER REPLACEMENT
REMOVAL PROCEDURE
1. Raise the hood.
2. Drain the washer solvent from the washer solvent container.
3. Remove the upper washer solvent container screw.
4. Remove the right front fender liner.
5. Disconnect the washer pump hose.
6. Disconnect the washer pump electrical connector.
7. Disconnect the washer solvent level sensor electrical connector.
8. Remove the washer pump from the container.
9. Remove the level sensor from the container.
10. Remove the lower washer solvent container screws.
