GTO V8-6.0L VIN U (2005)
Antenna Cable: Service and Repair
Antenna Cable Replacement
ANTENNA CABLE REPLACEMENT
REMOVAL PROCEDURE
1. Ensure that the radio is turned off.
2. Remove the hinge pillar trim panel.
3. Remove the rear quarter trim panel.
4. Remove the rear window trim panel.
5. Disconnect the antenna cable connector (1), from the antenna amplifier.
6. From under the instrument panel, disconnect the antenna cable connector (2), from the antenna extension cable
7. Unclip the antenna cable from the retaining clips.
8. Remove the antenna cable from the vehicle.
INSTALLATION PROCEDURE
1. Position the antenna cable in the vehicle.
2. Clip the antenna cable in the retaining clips.
3. From under the instrument panel, connect the antenna cable connector (2), from the antenna extension cable
4. Connect the antenna cable connector (1), to the antenna amplifier.
5. Install the rear window trim panel.
6. Install the rear quarter trim panel.
7. Install the hinge pillar trim panel.
8. Check radio reception.
