GTO V8-6.0L VIN U (2005)
Rear Bumper Shock Absorber: Service and Repair
Energy Absorber Replacement - Rear
Removal Procedure
1. Remove the rear bumper fascia. Refer to Fascia Replacement - Rear Bumper (See: Rear Bumper Cover / Fascia/Service and Repair) .
2. Remove the rear bumper energy absorber (1) from the rear impact bar (2) by disconnecting the two clips.
Installation Procedure
1. Position the rear bumper energy absorber (1) to the rear impact bar (2) ensuring that the clips engage over the impact bar flange.
2. Install the rear bumper fascia. Refer to Fascia Replacement - Rear Bumper (See: Rear Bumper Cover / Fascia/Service and Repair) .
