GTO V8-6.0L VIN U (2005)
Front Door Panel: Service and Repair
Door Handle Bracket Replacement - Inside
Door Handle Bracket Replacement - Inside
Removal Procedure
1. Remove the door energy absorber pad. Refer to Energy Absorber Pad Replacement (See: Energy Absorber Pad Replacement) .
2. Remove the 4 screws (3) attaching the inside handle bracket (1) to the trim panel (2).
3. Remove the inside handle bracket (1) from the vehicle.
4. Remove the cover (4) from the inside handle bracket (1), if necessary.
Installation Procedure
1. Install the cover (4) to the inside handle bracket (1), if removed.
2. Install the inside handle bracket (1) to the trim panel (2).