GTO V8-6.0L VIN U (2005)
Trunk / Liftgate Latch: Service and Repair
Latch Replacement - Rear Compartment Lid
Removal Procedure
1. Open the rear compartment.
2. Remove the rear compartment lid trim. Refer to Compartment Lid Trim Replacement - Rear (See: Trunk / Liftgate Interior Trim Panel/Service
and Repair) .
3. Use a grease pencil to mark the location of the rear compartment lid latch.
4. Remove the 2 bolts (1) attaching the latch assembly (2) to the rear compartment lid.
5. Withdraw the latch assembly (2) from the panel far enough to enable disconnection of the actuator rod (3) and the rear compartment lid release
cable (4).
6. Remove the rear compartment lid latch (2) from the rear compartment lid.
Installation Procedure