GTO V8-6.0L VIN U (2005)
Structural Brace: Service and Repair
Support Brace Replacement - Rear Compartment
Removal Procedure
1. Remove the rear compartment rear center trim panel carpet. Refer to Front Trim Panel Replacement - Rear Compartment (See: Interior Moulding
/ Trim/Trim Panel/Service and Repair/Front Trim Panel Replacement - Rear Compartment) in Interior Trim.
2. Remove the 2 nuts (5) attaching the rear compartment support brace (3) to the rear compartment panel frame (1).
3. Remove the 2 nuts (4) attaching the rear compartment support brace (3) to the underbody side rail brackets (2).
4. Remove the 2 bolts (6).
5. Lean the support brace (3) forward off the studs and remove from the rear compartment of the vehicle.
6. Remove the 4 bolts (1) from the rear brackets (2), if necessary.
7. Remove the brackets (2) from the rear compartment, if necessary.