GTO V8-6.0L VIN U (2005)
Door Lock Cylinder: Service and Repair
Lock Cylinder Replacement - Door
Removal Procedure
1. Remove the drivers door outside handle bracket. Refer to Door Handle Bracket Replacement - Outside (Driver Side) (See: Doors, Hood and
Trunk/Doors/Front Door/Front Door Handle/Front Door Exterior Handle/Service and Repair/Door Handle Components/Door Handle Bracket
Replacement - Outside (Driver Side))Door Handle Bracket Replacement - Outside (Passenger Side) (See: Doors, Hood and Trunk/Doors/Front
Door/Front Door Handle/Front Door Exterior Handle/Service and Repair/Door Handle Components/Door Handle Bracket Replacement - Outside
(Passenger Side)) .
2. Remove the clip (1) and slide the cam (7), spring (6), lever (5), spring (2) and rollers (4) away from the lock assembly.
3. Remove the spring (3) from the lock assembly.
4. Using a suitable pair of pliers, pull the door lock barrel housing pin (1) out of the drivers door outside handle bracket (2).