GTO V8-6.0L VIN U (2005)
Power Mirror Switch: Removal and Replacement
Power Mirror Switch Replacement
Removal Procedure
Important: When removing a power mirror switch, the ignition switch must be in the OFF position. This will eliminate the possibility of
shorting out the power mirror switch when using a metal tool to remove the power mirror switch from the wiring harness.
1. Remove the door trim panel. Refer to Trim Panel Replacement - Door (See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service
and Repair) .
2. Disengage the electrical connectors from the power mirror switch (1).
3. From behind the door trim panel, push the power mirror switch (1) free by depressing the tabs.
Installation Procedure
1. Install the power mirror switch (1) to the door trim panel.
2. Connect the electrical connector to the power mirror switch (1).
3. Install the door trim panel. Refer to Trim Panel Replacement - Door (See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service
and Repair) .
