GTO V8-6.0L VIN U (2005)
6. While holding the rear seat cushion pad (1), pull the rear corners of the seat cushion cover (2) forwards and away from the rear seat cushion pad to
disengage the hook and loop strips (3).
7. Pull the rear seat cushion cover up and over the forward edge of the rear seat cushion pad and remove.
INSTALLATION PROCEDURE
1. With the seat cushion cover (1), folded at the central horizontal strip of hook and loop, alight the center mark (2) on the rear seat cushion cover
with the center mark (3) on the seat cushion pad.
2. Press the folded edge of the rear seat cushion cover into the corresponding groove in the seat cushion pad to engage the hook and loop strip.
3. With the seat cover folded at the two vertical strips of the hook and loop (4), press the seat back cover into the corresponding grooves (5) in the
seat cushion pad.
4. Roll the front corners of the rear seat cushion cover over the seat cushion pad.
5. Roll the sides of the rear seat cushion cover over the seat cushion pad.
6. Roll the rear corners of the rear seat cushion cover over the seat cushion pad.
7. Position the seat cushion cover and the pad to the seat frame.