GTO V8-6.0L VIN U (2005)
8. Clip the seat cushion cover J-clips (1).
9. Install the center rear seat cushion, then the center rear seat cushion retaining screws.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the center rear seat cushion retaining screws to 2 Nm (18 lb in).
10. Install the rear seat.
Seat Cushion Replacement - Front
SEAT CUSHION REPLACEMENT - FRONT
REMOVAL PROCEDURE
1. Remove the front seat outer trim panel.
2. Remove the front seat.
3. Remove the seat back hinge cover.
4. Remove 2 seat cushion frame-to-seat back frame mounting bolts (1) from each side of the seat cushion.
5. Remove the seat back.
INSTALLATION PROCEDURE
1. Position the seat back to the seat cushion.